Steps to install:

1. Download the SmartLoop app from Keystone Technologies from the Apple App Store or from Google Play.
2. The app will ask for access to your Photos to store/retrieve QR-Codes. I did “Allow access to all photos“. If you were emailed a QR-Code, you could only allow access to that photo, or you could probably not allow access to any photos, and the app should still work fine for nearly everyone. 
3. The app will ask to use Bluetooth. You have to say “OK” to this, or it can’t talk to the lights. 
4. Open the app and under the More Menu in the lower right choose Regions.
5. Click on the blue “Scan or Select QR-Code” icon.
6. The app will ask for access to your Camera. Say “OK” to this one too.
7. Ask someone who has the QR-Code to let you scan it. (from their app have them, click on More, then Regions, , then User, and the QR code will appear for you to scan)
8. The app will ask you to confirm that you want to switch to a new region (They call rooms “regions”). Click “Confirm”. Your Current Region should now be: LLHS Gym Lights.
9. Click the “Back” button in the upper left. 

To Use:

1. Everything you would normally do is under “Scenes” on the bottom menu, but you can also control individual “Lights” or “Groups” of lights from the corresponding menus.
2. NOTE: The lights remember the last Scene used, so please change the Scene back to Normal when you are done messing around. 

Notes:

1. If you would like a new scene programmed into the app, please ask Lloyd or Scott.